Heat Pumps versus Central Heating Systems – Which One is Right for You?

If you are building a new home or simply updating the heating and air conditioning system in the one you have, there are many options on the table for you. Central heating and air conditions are one choice, then there are individual air conditioning units, portable heaters, and of course, heat pumps. Most people want a unit that offers temperature control in all of their rooms, which leaves central systems and heat pumps as the most likely options. But which one is the best choice?

The real answer to that question is that there is no answer. The decision between central heating systems and heat pumps comes down to several factors, and there is no one right choice for everyone.

Here are some pros and cons of each kind of system to weigh up before you make your decision about which kind of system to get:

First up, heat pumps: the most attractive thing about heat pumps for many people is the cost. Heat pumps offer heating and cooling in one single unit, which means that not only do you only have to shell out for one single unit when it comes time to purchase the system but you only have to maintain one single unit over the life of its use, so the overall operating costs are lower. Likewise, heat pumps cost less to operate on a daily basis. Heat pumps work with the existing heat in the air, so there is no artificial heating or cooling of the air was with central heating systems. Your electric bills will be lower, and the impact on the environment is less as well.

There are some downsides to heat pumps, however. They are not for people who live in places with temperature extremes. Most HVAC contractors recommend that people who live in environments with temperatures that frequently go below 40 degrees in the winter or over 85 degrees in the summer. Because the heat pump can only work by drawing heat out of the air in the winter and pulling it out of your home in the summer, it can’t work hard enough to keep up with those temperature extremes.

If you live someplace with temperature extremes, then a central HVAC system is the right choice for you. It can keep up effectively with temperature extremes and will keep you more comfortable.

The downside to central systems is that they are more expensive. You need a separate heating and cooling system, which means a bigger cost upfront and higher maintenance cost over the life of the system. Because central systems artificially heat and cool the air, they are more expensive to run on a daily basis.

You have to evaluate your individual needs before deciding which system is right for you. Then give Florence HVAC Experts a call for a quote on installing your heating system or heat pump.

Florence HVAC Experts
Florence, SC 29501
843-636-3260
http://florencehvacexperts.com/

Is A Heat Pump Service Plan Worth It?

A heat pump service plan is an agreement between you and an HVAC contractor. The specific contents of the service plan will vary from one contractor to another. In some areas, the offerings might be completely different. However, the gist of it is that you agree to pay a specific sum of money in exchange for annual services. Again, you should go over the contents of the contract with your HVAC contractor. However, a lot of people are skeptical about service plans. But when you look at it closely, service plans can offer great value for money if you know what you are looking for.

Check out some of the ways a heat pump service plan can pay for itself:

Fast and reliable service One of the problems of hiring a different HVAC contractor whenever you need help with your heat pump is the hassle of finding reliable service. You’d have to go through every single part of the process such as looking for contractors in your area, weeding out the bad ones, and choosing one company over the other. However, if you choose to subscribe to an annual service plan, you can save yourself the hassle and get the service you need fast. Offerings include solutions for dated systems It can be tough to find a contractor that can work on dated HVAC systems. Not to mention the costs associated with upgrading older systems. However, when you sign up for an HVAC service plan, you are effectively saving yourself thousands of dollars in labor costs and more. This will also include future HVAC maintenance and other tasks. Premium service at a discount When you add up the costs of individual HVAC services, you will quickly find that it costs a fortune to have them all at the same time. However, when you get an annual service plan, you can save a lot of money by having one contractor offer a bunch of services for a fixed price. Experience and stability Getting a service plan is great. What’s even better is signing up with a contractor that’s got years of experience under their belt. That means you get premium service at a lower cost. Again, this will save you a ton of money in the long run. You don’t need to make hard choices If you’re cash-strapped, you will need to make hard choices between getting all of your essentials together and other needs such as heating and cooling maintenance. In most cases, you would choose the essentials. Still, you will need to tend to the other needs somehow. But with an HVAC service plan, you get the best of both worlds. You won’t skip annual HVAC maintenance Keeping your HVAC in good shape for the long haul is not an easy task. There will be a lot of cleaning, inspecting, and fixing along the way. It can be cumbersome at best which is the reason why a lot of homeowners forgo HVAC maintenance. But with a service plan with Florence HVAC Experts, you can get everything you need in one payment package.

For all of your heating and cooling needs, Florence HVAC Experts is here for you. You may reach us at 843-636-3260.

Florence HVAC Experts Florence, SC 29501 843-636-3260 http://florencehvacexperts.com/

https://florencehvacexperts.com/heat-pump-service-plan-worth-it/

What Are The Most Common Heat Pump Problems?

It’s great to have a heat pump in your home. Who doesn’t want to keep cool during summer and cozy during winter? Everybody wants to feel comfortable inside the confines of their own home. However, all of that convenience goes away when the heat pump gets broken. But what are the common heat pump issues? If you’ve never had a problem with your heat pump before, you’ve got it all good. However, you shouldn’t be too confident. There are unexpected times when the heat pump just doesn’t work as it should. In these circumstances, it important to figure out what is causing the problem and resolve them quickly. Of course, you will need the expertise of an HVAC contractor in some complex situations.

Common heat pump problems you should know about:

Unit not turning on Heat Pump in Florence SC problems can come in a few packages. One of the most common issues you could run into are power problems. There are times when the heat pump doesn’t turn on at all. In most cases, the problem is caused by a faulty thermostat, broken starter capacitor, or a broken reversing valve. There could be other reasons why the unit won’t turn on. If you can’t seem to find the cause of the problem, call an HVAC contractor. Unit not heating If you notice that the heat pump isn’t doing its job of heating your home, it could be either one of the three common causes or a combination of them. The first probable cause is a blocked unit. If the heat pump is blocked, efficiency drops, and heating is greatly affected. The second reason is a dirty air filter. It’s normal for air filters to get dirty over time. However, when they are full, air can’t easily pass through them. This causes a drop in system efficiency. The third reason is a low refrigerant charge. There could be a leak somewhere along the pipes that are causing the low refrigerant charge. In some cases, the lack of heating could be caused by a combination of the said causes. Unit not cooling The unit might not provide cooling efficiently when there are problems with the thermostat. The issue could also spring when the unit doesn’t have enough refrigerant. Some of the internal components could also be the reasons for the reduced cooling capacity. In such cases, it is important to call a heating and cooling expert. Unit running constantly If the unit is running non-stop, you should call in Florence HVAC Experts. If the unit isn’t stopping, it could be caused by unusually cold weather. Heat pumps are designed to provide heating gradually. When weather brings down the temperatures, your heat pump could run constantly. However, this is not cause for alarm. It is only a problem when there is an issue with the thermostat or some components linked to the compressor begins to fail.

If you need help with your heat pump, you may call Florence HVAC Experts. You may reach us at (843) 353-4089.

Florence HVAC Experts Florence, SC 29501 843-636-3260 http://florencehvacexperts.com/

https://florencehvacexperts.com/common-heat-pump-problems/

How Can You Take Advantage of The Many Benefits of a Heat Pump?

Heating and cooling systems normally use up a lot of energy. That’s one reason why homeowners want to make sure that they are getting the most efficient system installed. Other than that, homeowners also want to make sure that their heating and cooling system remains efficient all year round to keep energy consumption at a minimum. When it comes to the most efficient type of heating and cooling system, a heat pump is what you are looking for. It comes with a number of advantages over traditional systems. The primary benefit is efficiency. When you compare a heat pump with a traditional heating and cooling system, the difference is staggering.

How does a heat pump work?

A heat pump Florence SC works by moving air in and around the house which alters the temperature. This is done by the use of an indoor and outdoor unit. When used for cooling, the indoor unit transfers the heat from inside the house and dissipates it through the outside unit. When the unit is set to heating mode, the process is reversed. Unlike traditional cooling systems like air conditioners, heat pumps can work both ways despite the name. The advantages of installing a heat pump at home High efficiency What you really need in a heating and cooling system is efficiency. It is given that HVAC systems use up a lot of electricity to keep you comfortable all year long. However, a heat pump is far more efficient than conventional heating and cooling systems. In fact, heat pumps are four times efficient than other systems. Sometimes, the gap grows even wider as more manufacturers add features that enhance the efficiency of heat pumps. Minimal operating costs How’s your energy bill recently? If you are experiencing high energy costs, you might want to consider upgrading to a heat pump instead of using the same central air conditioning unit you’ve had for the last ten years. When it comes to operating costs, you simply can’t go wrong with a heat pump. Other than being perfectly efficient, you don’t need to call an HVAC contractor every now and then to do repairs. Heat pumps are versatile, efficient, and they don’t go bad very easily. A smaller carbon footprint Once a heating and cooling system reaches a new level of efficiency, it automatically translates to less energy usage. This reduced energy usage then translates to a smaller carbon footprint compared to traditional heating and cooling systems. That’s why people who are environmentally conscious choose to install heat pumps over other systems. Silent operation If you are after comfort that doesn’t come with any caveats, a heat pump is for you. It works wonderfully while remaining silent the entire time. You won’t even notice that it is there. When you choose to have a heat pump in your home, be sure to contact Florence HVAC Experts for the installation and maintenance.

Are you ready to upgrade your old heating and cooling system to a brand-new heat pump? If you are, call Florence HVAC Experts today!

Florence HVAC Experts Florence, SC 29501 843-636-3260 http://florencehvacexperts.com/

https://florencehvacexperts.com/benefits-of-a-heat-pump/

Prepare Your Heat Pump For Winter

Winter is coming. Don't wait until it turns cold to prepare your heat pump system. If you are proactive about taking preventative steps, your HVAC system will be able weather the winter without much trouble.

These are our top tips for preparing your heat pump to withstand winter:

1. Clear the area around your heat pump.

Airflow problems could be caused by branches, leaves, or snow located within two feet of your heat pump. These items can cause heat pump efficiency problems and restrict airflow.

1. Your HVAC System Filter should be cleaned.

Filters that are dirty can cause airflow to be blocked. Dirty filters can block airflow and make your HVAC system work harder, use more energy, and cause higher utility bills. Air filters should be changed according to the type of filter and how much dirt they have. If your filter isn't changed regularly, your system will perform better.

1. Heat Pump's Thermostat Settings

There is a choice of three settings: heat, cool, and emergency heat. Your thermostat should be set to heat mode if you plan to use your heat in fall. In emergency heat mode, your heat pump can be used as your heat source. You should only use it if your heat pump is not working properly or is iced up. Note: Emergency heat can be more costly than regular heat mode.

1. Schedule maintenance.

It is important to inspect your heat pump system annually. It is best to schedule your annual maintenance prior to the arrival of colder weather. If you wait until the coldest season, it can be difficult for you to schedule an appointment. This is the HVAC industry's busiest season. An HVAC maintenance plan can help prevent 90% of equipment failures from dirt. This will increase efficiency and extend the life of your equipment.

Tips to Maximize Heat Pump Performance In Winter

Winter heat pumps operate differently from summer heat pumps. Winter months are a time to be cautious with your heat pump system. This will allow you to get the most from your heat pump system and prolong its life. Why is my heat pump different in winter? Heat pumps don't produce heat. Heat pumps move heat from one place to the next. They can draw heat from the air in even cold temperatures. They can lose some of their efficiency if they are below freezing. With careful usage, you can ensure that your winter heat pump performance remains high. Here are some tips to maximize heat pump performance in winter.

1. Turning the thermostat to 90 degrees will make heating your home slower. It will consume more energy if there is an emergency heat back up. You can control your heating system with a smart thermostat for heat pumps systems. This will help you save money and provide comfort. Learn more about smart thermostats, and the savings and comfort they provide.
2. Don't rely on emergency heat. You should reserve emergency heat for emergencies. This mode is very inefficient and can quickly increase energy bills.
3. Clean your filter. If your filter is dirty, it will prevent the system from moving air. Clean filters will extend the life of your system, and improve indoor air quality.
4. Make sure to clear your outdoor unit from leaves and other debris. Air must circulate around your outdoor unit. Clear away any fallen leaves or other debris to ensure optimal performance.
5. You should not cover your system. Your system was built to survive outdoors and should not be covered in winter. Winter can lead to serious problems, such as mold growth and pest infestation.
6. In frigid temperatures, keep ice from your system. This can be dangerous and potentially hazardous for your heat pump. Keep your heat pump in defrost mode. It is not something to worry about when your heat pump goes into defrost mode. This mode is not something to be afraid of, even though it is often feared by homeowners. If your heating system is left in this mode for too many days, it will likely need to be replaced. If your system is in need of maintenance, don’t hesitate to call Florence HVAC Experts.
7. Regular maintenance should be done. It is recommended that professional cleaning and maintenance be done at least once a year in order to maintain efficiency and prevent unexpected breakdowns.

Have questions about winter heat pumps Florence HVAC Experts will help you choose the right heat pump for Florence SC climate. Routine heat pump maintenance can be scheduled. You may reach us at (843) 636-3260.

Florence HVAC Experts Florence, SC 29501 843-636-3260 http://florencehvacexperts.com/

http://florencehvacexperts.com/prepare-heat-pump-for-winter/

Basic Heat Pump Problems And Solutions

In general, a heat pump provides both heating and cooling. With that said, there’s also a possibility that two things can go wrong at ones. However, heat pumps down often break down. On the other hand, age and a bunch of other factors will wear out a heat pump system over time and will need some troubleshooting.

Common heat pump problems and how to troubleshoot each problem

Freezing up – one of the issues that commonly happens with heat pumps is a freeze up. This is when there is a frost buildup on the outside unit. Once the outside unit is covered in frost or ice, there is little to no heat transfer in the system which affects performance indoors and greatly impedes the system function. Other than that, the system could be damaged. Since the system relies on the heating and cooling of the refrigerant, the outside unit must not be impeded by anything including ice buildup. A layer of frost normally builds up on the outside unit during the winter. To counter this, the heat pump will go into defrost mode from time to time. However, there will be instances where the automatic defrost mode isn’t enough. Snow and ice must be cleared from the outside unit to prevent any concerns. During the summer, there is also a possibility of the outside unit freezing up. However, this is not due to snow. It is much more alarming as it could be caused by a refrigerant leak. You will need a Florence heat pump repair in case this is the issue. Unit running constantly – during the summer, the heat pump might work harder to cool the house. It gets even tougher for the heat pump when it’s quite hot outside. However, during these times it’s quite normal for the heat pump to go on overdrive and work for extended periods. This could also be due to faulty thermostat settings. Do check your thermostat if the correct settings are keyed in. Sometimes the issue could be resolved with ease with the simplest of approaches. However, when the heat pump is still continuously running even when it is not cooling, you might want to call an HVAC contractor for help. It could be a sign that there’s a problem with your HVAC system. Blowing cold in heat mode – another common problem that you might run into with your heat pump is when it blows cold air when it is switched to heat mode. This is something that you would see in heating and air conditioning systems. Often times, this is caused by human error when the incorrect settings are placed. If that’s not the case, it could either be due to a valve problem, refrigerant issues, or a problem with the compressor. Either way, these issues should only be handled by a professional. You simply can’t DIY yourself out of this kind of a mess. It’s best to call in the professionals like Florence HVAC Experts for a quick and long-lasting solution.

Call Florence HVAC Experts if you have any concerns about your HVAC system.

Florence HVAC Experts Florence, SC 29501 843-636-3260 http://florencehvacexperts.com/

http://florencehvacexperts.com/basic-heat-pump-problems-and-solutions/

How Can Heat Pumps Help You Save Money?

The cost of installing and running various kinds of heat pumps differ in some ways. Geothermal heat pumps are costlier to install compared to air source heat pumps since ground source pumps will require you to dig down to a certain heat source. It will also require you to work with more complicated heat transfer systems. That can also be more expensive based on your property’s terrain. Your expenses can range between $5,000 and $7,500 if you want to have a ground source heat pump system. Air source heat pumps are cheaper options that cost between $1,500 and $4,000. These units are simpler and can easily be installed.

Costs Of Running And Repairing A Heat Pump

The amount you need to pay to operate and repair a heat pump depends on the type of system you have. It is less expensive to operate a ground source heat pump since the water and the ground have a constant temperature that lets the heat pump to operate effectively. Ground source units likewise have the benefit of not being subjected to the weather outdoors, thus preventing too much wear and tear. On the other hand, they can be quite expensive to repair especially if you have to access the underground part of the unit. Air source units are easy to service and access. However, they might require more constant maintenance since they are constantly exposed to the elements. Additionally, air source heat pumps might utilize more supplemental energy to operate, particularly in areas with colder climates, and this will lead to a higher utility bill. Florence heat pumps can help you save between 30% and 40% or more on your utility bill. However, neglecting the heat pump can lead to the unit’s reduced efficiency. It is important to consider the climate where you plan to use the heat pump so that you can choose the right system that will run efficiently in your area. Provided that you install the best and most appropriate kind of heat pump, this unit can help you reduce your utility costs. Hire A Pro Always remember that it is better to hire a professional HVAC contractor to fix your heat pump problems. Heat pumps may contain hazardous materials and that means it needs to be dealt by professionals only. A chemical leak for instance, is already bad news. You don’t want to make things worse by injuring yourself because you didn’t know how to handle the broken device correctly. A heat pump can last for as long as three decades, and geothermal units top the list when it comes to longevity. As a matter of fact, some parts of ground source heat pump may even last longer. Keep in mind that today’s technology can quickly change even before your heat pump has worn out and that means your unit may even outlast the ability of your Florence HVAC Experts to maintain and repair it. Furthermore, keep an eye out for brand new types of heat pumps especially the ones that are safer and more effective.

Call Florence HVAC Experts if you need help installing, fixing, or replacing your heat pumps.

Florence HVAC Experts Florence,SC 29501 843-636-3260 http://florencehvacexperts.com/

http://florencehvacexperts.com/heat-pumps-help-save-money/

The Main Differences Between A Heat Pump And An Air Conditioner

For those who are not quite familiar with how air conditioners and heat pump work, this article is for you. Basically, these two perform the same tasks. In HVAC systems, you can either opt for the conventional air conditioning unit or a heat pump. What’s different between the two? If you’re wondering what the difference is between the two, you should continue reading this article.

Air conditioner vs. heat pump

First up, let’s talk about heat pumps. In general, heat pumps work both ways. They can provide cool or warm air into different areas of the house. On the other hand, an air conditioning unit can only provide a cooling effect and not the other way around. As you may see, heat pumps seem to have the upper hand. However, let’s not be too hasty. Let’s learn about the different types of heat pumps and on what variant fits your needs. Air source – these types of heat pumps run on electricity. Basically, what they do is take the air from the outside and run it through a refrigerant cycle which provides hot or cold air into the house. That’s heating and air in one machine. Unlike ground units, the air-source unit is more cost-efficient. On the other hand, they are not that effective for installation in areas where temperatures normally dip below freezing. Geothermal – this type of heat pump generally operates under the same principle. However, instead of relying on the outside air, it harnesses the natural heat of the earth. Geothermal heat pumps transfer heat to or from the ground. This type of heat pump is perfect for areas that are normally exposed to below freezing temperatures. You would also need an HVAC contractor in Florence to set up, service, maintain, and or upgrade this type of system. Gas-powered heat pumps – basically, these systems are air-source units that run on natural gas. These heat pumps are used in areas where natural gas is a more favorable option than electricity. Ductless heat pumps – these heat pumps basically provide hot or cold air through a hose connected to the compressor. These units basically run without the need for ducts, hence the name. Air conditioning units As you might have already known by now, air conditioning units can only provide the cooling aspect and not the heating part. However, this does not mean they are not good for the job. Air conditioning units are cheaper and are easier to maintain. There are three common variants that you can choose from. Central air conditioning – by far, this is the most efficient system among the three variants. The cooling process happens in a central location. The cool air is then transferred to different areas of the home through ducts and commonly used in HVAC systems. Window type air conditioners – these air conditioners are what you might normally see in small homes and similar applications. Window type ACs are easy to install, remove, and upgrade. Due to their size, window type air conditioners are normally limited to cooling a single room. Split type air conditioners – unlike a window type air conditioner, split type units come in two sections. The inside unit and the outside unit. Regardless of the heating and cooling system, you have at home, it is always best to have a professional maintain, upgrade, and or repair the system. Hiring professional contractors like Florence HVAC Experts is one of the best things you can do.

Call Florence HVAC Experts if you need help in anything related to heating and cooling.

Florence HVAC Experts Florence, SC 29501 843-636-3260 http://florencehvacexperts.com/

http://florencehvacexperts.com/the-main-differences-between-a-heat-pump-and-an-air-conditioner/

HVAC 101 – Furnace Maintenance Guide

It’s during the winter season that you crank up the use of your HVAC system. Not that summer months are any different but you would need a lot of heat to stay warm in the freezing temperatures of winter. On the other hand, you won’t find it as cozy if your furnace were to break down. Of course, before the first fall of snow, you should already make sure that your HVAC system is up and running and will not break down during these crucial months. Here are some tips on how you could ensure that your system is in top shape:

For best results, always consider hiring an HVAC contractor

The following instructions will be a 13-step guide on how to take apart certain areas of your furnace for servicing. Do bear in mind that some parts may be hard to remove. If you are unsure how to proceed, always leave it to the professionals or to someone who knows how to take apart the furnace.

1. Unscrew the combustion chamber door – this is the first step that you should make. The number of screws on the door will vary depending on the model that you may have.

1. Check the burner flames – a blue flame is a good indicator that the burners are in good condition. However, a yellow or orange-colored flame means that cleaning must be done.

1. Vacuum the cavities on the burner and blower – this must be done when the unit is off and has been left to cool down. Everything must be cool to the touch before proceeding.

1. Take out the blower and clean it – again, the complexity of the removal may differ depending on what unit you have. Always consider hiring a Florence HVAC contractor for guaranteed results.

1. Vacuum the blower blades – the blower blades must be cleaned and should be brushed as well to remove and dirt that accumulated on them.

1. Remove and change the filter – the filter is a necessary part of ensuring only clean air enters the system. Periodically, the filters must be swapped out with new ones.

1. Vacuum or blow dust off the pilot – the pilot must be kept clean at all times to avoid false readings.

1. Clean the flame sensor – this part is also crucial and must also be cleaned thoroughly.

1. Remove dust from the igniter – as, with other parts, all dust accumulated on top of this part must be removed.

1. Check the drive belt – the belt must not have any frays or cracks. If any are spotted, the belt must be replaced immediately.

1. Lubricate bearings – this is only done when necessary.

1. Adjust the dampers – again, this should only be done when needed.

1. Seal any leaks in ducts – if there are any leaks in the ducts, have them sealed to prevent heat from escaping.

The heating and cooling methods vary in different regions in the United States. Some areas that are much colder use furnaces to keep warm during the summer. However, in areas that are not affected by heavy snowfall, a heat pump is often used. Regardless of the kind of system you have at home, it should be noted that hiring an HVAC contractor is the recommended option when maintaining heating and cooling systems. Professional contractors like Florence HVAC Experts have years of experience in the field and are very good at what they do.  

Call Florence HVAC Experts now to inquire about their air conditioner maintenance services.

Florence HVAC Experts Florence, SC 29501 843-636-3260 http://florencehvacexperts.com/

http://florencehvacexperts.com/hvac-101-furnace-maintenance-guide/

5 HVAC Maintenance Tips in Fall

Fall is one of those beautiful times of the year where the view outside simply morphs into an entirely different picture. Fall is also one of the times of the year where you need to step up your game when it comes to HVAC maintenance. It’s during this time when the climate changes from mild to subzero. This drastic shift in temperature generally has an impact on your HVAC system. That is the reason why fall is one of the perfect times in the year to maintain your HVAC system. Of course, there’s no better way to maintain the system than to hire a Florence HVAC contractor and have it done professionally. However, you can still do a number of things to make the professional maintenance a lot easier and faster. Here are some things that you could do at home:

Professional HVAC maintenance is always recommended over DIY maintenance

1. Checking the air filters – are your air filters still clean? If they are, you’re good to go. Otherwise, you may need to swap them out with new ones. The air filters in your HVAC system play an essential role in keeping the air quality inside your home as good as possible. It’s also responsible for keeping the system working smoothly. Dirty air filters can prevent the system from being energy-efficient. This means you need to swap out the filters with clean ones when you detect that they are already filled with dirt.

1. Seal any air leaks – your ductwork may need a little check from time to time. When you find that there are leaks, you should seal them right away. It doesn’t need to be really good. You can always do some makeshift repairs just for the meantime and then call in an HVAC contractor to have it done correctly.

1. Clean your outdoor unit – if you notice that there’s already overgrowth near your outdoor unit, you may need to do some cleaning of your own. The outdoor unit must be kept clean all the time. It’s where all the heat exchange happens and it’s very important if you want to keep your home cool. It’s also one part of your HVAC that needs to be frequently cleaned since it is located outside your home. Be sure that there are no dirt and debris surrounding the unit that could possibly hurt its performance.

1. Schedule professional maintenance – if you really want to take your maintenance up a notch, you should consider hiring professional contractors to take care of your heating and air. The obvious reason is that professionals can always do a better job. The next thing is that professionals know what problems to look for during maintenance.

Professional contractors like Florence HVAC Experts know a great deal about different systems and can handle the maintenance smoothly. The reason why you would want to have your HVAC system professionally maintained is so that it could last longer and run as efficiently as possible. Well-maintained systems run efficiently thus reducing the electricity bill in general.

In need of a reliable HVAC contractor near your area? Call Florence HVAC Experts today!

Florence HVAC Experts Florence, SC 29501 843-636-3260 http://florencehvacexperts.com/

http://florencehvacexperts.com/5-hvac-maintenance-tips-in-fall/

Misconceptions About Underfloor Heating That You Should Know

You might know a lot of things about underfloor heating but are all of them true? There are a lot of facts about underfloor heating but there are misconceptions as well. It’s good to know what information is true. Separating the real facts from plain myth is very important. Let’s take a look at the common false information about underfloor heating. It will be great to know the real score with that heat pump you just had installed.

Call your local HVAC contractor about underfloor heating to get straight answers

1. Underfloor heating costs more than radiators – while this bit is true, it’s not entirely a bad thing. Typically, installing an underfloor heating system costs anywhere from 20-30% more than your conventional radiator. On the other hand, underfloor heating is much more efficient than radiators and will cut your energy costs significantly that the price difference would be saved in just a couple of months.

1. Underfloor heating isn’t as effective as radiators – it’s also true that radiators produce more heat. However, underfloor heating spreads out all throughout the entire floor and provides even heating in the specified area.

1. Underfloor heating is pure electric – although underfloor heating requires some electricity to operate, it does not entirely run on electricity. There are no electric heating elements that are being used. Instead, hot water is run through pipes embedded beneath your floor to produce heat. A heat pump is often installed in the system to make it more effective.

1. Temperature is inconsistent with underfloor heating – the reaction time with underfloor heating is a bit slow compared to radiators. However, this won’t be a reason to bear uncomfortable temperatures as it could be controlled by the thermostat.

1. Underfloor heating is only for floors – contrary to popular belief, underfloor heating can also be installed in other places. Ask your HVAC contractor about this. They will tell you that walls and ceilings can also be fitted with the same system used to heat floors.

1. Your feet could swell with underfloor heating – with today’s standards and advances in technology, there isn’t any chance that your feet would swell because of underfloor heating. It’s simply not possible with today’s systems. Some heating systems are also fitted with heat pumps to allow for better cooling during the summer.

1. Underfloor heating is unhealthy – this is basically stretching the facts a little bit too much. There is no scientific study that claims that underfloor heating can trigger diseases of any sort. In fact, this type of heating is concealed within the floor itself which means you won’t come into contact with it at all, thus rids chances of it making you sick.

1. Underfloor heating isn’t compatible with certain species of wood – in some cases, this might hold true. However, stabilized wood will no longer warp or break when exposed to heat. Consult an HVAC contractor in Florence for more information.

With regards to heating and cooling, it is always a great idea to start with the experts. Professional HVAC companies like Florence HVAC Experts can offer a lot of information to homeowners aiding them in making purchases and upgrades.

Need help with your HVAC system? Give Florence HVAC Experts a call today.

Florence HVAC Experts Florence, SC 29501 843-636-3260 http://florencehvacexperts.com/

http://florencehvacexperts.com/misconceptions-about-underfloor-heating-that-you-should-know/

Tips For An Efficient Heat Pump

Whether you are using your heat pump to keep your home warm during winter or give you air conditioning heat relief during summer, there are a few things you can do to make sure that your heat pump is running as efficiently as possible. Good Timing Every heat pump come with a timer. A few of the newer versions feature a seven day timer so your heat pump will switch on and off at different times each day for the entire week. Of course, this will all depend on your lifestyle. During winter, you may schedule your heat pump to switch on 45 minutes before you get up in the morning, so your kitchen and lounge are toasty once you start to make breakfast. During summer, you may set your heat pump to turn on as you leave for work. When you get out of your hot vehicle and open the front door, you will be welcomed by a cool breeze. Using a timer is economical in both ways compared to just leaving the heat pump open all day even when there is no one at home. Using a timer can also help you avoid making the next mistake which will be discussed next. Setting and Forgetting The Heat Pump Ducted systems and heat pumps are not like the older boiler heating systems. Before, when there were oil fin heaters, people will turn up the thermostat as high as possible so that the system will heat up faster. Once their home began to get war, they would lower the temperature back to a temperature that is a bit more reasonable. Heat pumps are way smarter than that. When your heat pump heats your house to 32 degrees once you come home then switching it down again once you get too warm will not heat your house any quicker. For power saving and economy, it is better to select a comfortable temperature, between a range of 18 and 22 degrees Celsius, and allow the heat pump to do its job. Always fiddling with the unit’s thermostat is another way of lower the efficiency of your heat pump unit and adding to your ever rising power bill. Keeping Your Heat Pump Clean Vacuuming the filter of your heat pump regularly can help them remain efficient. During winter, when your heat pump unit is used constantly, you may want to do it every time you vacuum your house. If you want to get more information or you want a professional to get this job done for you, you should call Florence HVAC Experts. You should also consider having your heat pumps cleaned every year by a professional HVAC contractor. He can do a lot of things for you aside from vacuuming the air filters. They will take your system apart, and give your heat pump a thorough clean that will surely improve its efficiency. Choose Energy Efficiency Just like all appliances, a heat pump Florence are rated according to their energy efficiency. Given that, not all heat pump systems are equal. So, be sure to choose the most efficient heat pump model out there. If you need help, do not hesitate to get it touch with a professional HVAC contractor.

Call Florence HVAC Experts if you need help in installing, repairing, or maintaining your heat pump system.

Florence HVAC Experts Florence,SC 29501 843-636-3260 http://florencehvacexperts.com/

http://florencehvacexperts.com/tips-for-an-efficient-heat-pump/

Ways NOT to Use Your Heat Pump

You might be shocked by some of the ways a heat pump works differently compared to a furnace or a boiler. In case you want to lower your energy use and maximize your comfort, listed below are a few things you need to know. Don’t Worry About The Temperature Reading Compared to your old heating system, a heat pump will measure ambient room temperature differently. Set the heat pump to a comfortable temperature and then adjust it up or down in the following days until you have reached the right temperature number, which you feel is most comfortable for you. Never Leave Your Existing Heating System Cranked Up If you leave your current heating system cranked up, the old system will be competing with the Florence heat pump, which means it is using up more energy and money. In the place where you are using your heat pump, set the old thermostat at about 10 degrees lower than it used to so your old system will turn into a backup heat source. In case the area becomes chilly during colder days, do not be scared to crank up the old thermostat temporarily. There’s No Need To Fuss Over It Everyday You might have lowered the temperature on your old heating system before going to work or sleep. A heat pump works differently. It achieves peak efficiency by remaining at a set temperature. You have to find the best setting that works well with you. But if you will be gone for more than 24 hours then you can turn your thermostat down. Do Not Go Easy On It The best way for you to benefit from the superior efficiency of a heat pump is to use it as much as you can. You can even experiment by expanding the zone like opening a few doors, then turning up the fan. You might get surprised how big a space a heat pump can take on. Never Use Auto Mode Many homeowners believe that the auto mode as the most efficient setting. However, if you use it, your unit will be at risk of toggling between heating and cooling unnecessarily. Your system will run efficiently if you set it to heat during winter and cool during summer. Auto fan is a different setting and is fine to use. Do Not Use The Lowest Fan Speed This one is strange but is definitely true. A heat pump will work most efficiently when it is set to a higher fan speed. Doing so can generate more air movement and ambient noise. So be sure to use the highest fan speed that you are comfortable with and then dial in the temperature setting that you prefer. Never Skimp On Maintenance This is true for nearly all heating systems. However, that does not make it much less important. It is quick and simple to do. If you want to know more about cleaning as well as replacing cartridges then check on the user manual. You can also call in an HVAC contractor to assist you.

Call Florence HVAC Experts if you need professional help with your heat pump. 

Florence HVAC Experts Florence,SC 29501 843-636-3260 http://florencehvacexperts.com/

http://florencehvacexperts.com/ways-not-to-use-your-heat-pump/

What To Do If Your Heat Pump Does Not Blow Hot Air?

So, what’s the deal when your heat pump is not giving you the heat you need? Before you call a professional for a heat pump repair service, it is important to know the common causes of this kind of problem. Among the most likely culprit include low refrigerant charge, outside unit cannot breathe or is dirty, filthy air filter, or your body is tricking you. Low Refrigerant Charge The refrigerant allows your heat pump to transfer heat. During the warmer season, your heat pump uses the refrigerant to move heat from inside your house to outdoors. During the colder season, the other way around happens. The heat outdoors is brought inside your house. Problems with the unit begins to happen when your heat pump is running low on refrigerant. If so, your unit will find it difficult to transfer heat into or out of your home. The best thing to do if you find yourself in this kind of scenario is to call an HVAC contractor so your refrigerant charge can be checked. In case it is running low, your unit might also have issues with a refrigerant leak that will require some fixing. Outside Unit Cannot Breathe or Is Filthy In case your Florence heat pump in placed on heat mode, the outdoor unit will take on heat from the air through the refrigerant. The system will then transfer the warm refrigerant to the outdoor unit where it will start heating the air inside your house. However, the outdoor unit will not be able to absorb sufficient heat if it is filthy, covered in grass or leaves, and is surrounded by barriers like a fence. Be sure to clear away all everything that is blocking the airflow surrounding the outdoor unit. To remove the dirt on the condenser coil, which is the part that takes in heat, you have to purchase a foaming coil cleaner and utilize it together with a water sprayer. You may also hire a contractor who can provide you with heat pump repair services. Filthy Air Filter Whenever your air filter becomes too filthy, it will begin blocking the flow of air to the evaporator coil, which is the part where the air is heated whenever the heat pump is set on heat mode. You will know that a dirty filter is the problem if there is almost no air coming out of the air vents. You have to check the filter and replace it if it is filthy. Additionally, If your family has allergy problems, be sure to check your air filter choices and find one that can help improve the quality of your indoor air. Your Body Is Playing Tricks On You Your body might be playing tricks on you and wants you to believe that the heat pump is not blowing hot air. The main reason for this is that the heat pump might be giving off heat that is a bit lower than your body’s temperature. Therefore, the air from the heat pump would feel relatively cool when compared to your body and it is still heating your home. The colder the temperature gets outside, the colder the air from the heat pump will be. It is mainly due to the fact that the heat pump is have difficulties getting heat from the air outdoors. In case the outdoor temperatures fall below 40 degrees, then the auxiliary heating coil will start and make you feel warm again inside your house.

Call Florence HVAC Experts if you are having issues with your heat pump.

Florence HVAC Experts Florence,SC 29501 843-636-3260 http://florencehvacexperts.com/

http://florencehvacexperts.com/heat-pump-does-not-blow-hot-air/